Monday to Friday 8:00-17:00
Castable elastomers are widely used, and can be used where the maximum abrasion resistance, mechanical strength and physical strength are required, including various molded parts, high-quality polyurethane wheels, polyurethane rubber rollers, etc.
YALIDE > Material Series Castable elastomers are widely used, and can be used where the maximum abrasion resistance, mechanical strength and physical strength are required, including various molded parts, high-quality polyurethane wheels, polyurethane rubber rollers, etc.
Castable elastomers are widely used, and can be used where the maximum abrasion resistance, mechanical strength and physical strength are required, including various molded parts, high-quality polyurethane wheels, polyurethane rubber rollers, etc.
NDIthane has excellent dynamic mechanical property, friction coefficient, abrasion resistance, penetration resistance and good adhesion with metals and polar macromolecules. It can meet various complex environment and application requirements.
Conventional polyester elastomers have weak water resistance, and they undergo hydrolysis with temperature and water vapor, resulting in the precipitation of acid, which in turn promotes their hydrolysis. MDIthane modifies the material to enhance its water resistance and environmental adaptability at room temperature, with characteristics such as low moisture absorption, permeability, resistance to steam, water, and seawater.
Loathane is a material with high Young's modulus that can maintain long-term resistance to screw deformation and fatigue under high strength and rigidity. In general, low hardness and higher elasticity are accompanied by lower load-bearing capacity, but polyurethane elastomers can maintain the elasticity of rubber at high hardness, thereby achieving high load-bearing capacity. Moreover, the compressive stress of polyurethane elastomers increases with the increase of compression ratio.
Fricthane is a diisocyanate application material developed on the raw material 1.5-naphthalene, which has high tensile strength. Special tread types can help improve starting resistance, wet grip, and braking effectiveness. A higher coefficient of friction can improve tire safety, prevent slippage, and enhance braking performance.
Electrane is an NDI polyurethane elastomer used in conductive systems. At various frequencies and temperatures! Under stable conditions, it can achieve insulation, conductivity, and anti-static purposes. Except for the addition of conductive agents, the surrounding resistance operates with high uniformity. The resistance value ranges from 103-10 ° Q (for conductive applications) to 106-10 ° Q (for anti-static applications).
Rollthane material has better heat resistance, higher load capacity, and lower compression permanent deformation. The general polyurethane elastomer accelerates the aging process of polyurethane under the simultaneous action of high temperature and oxygen, but Rollthane can exhibit high overall high-temperature strength.
In order to meet the needs of customers in different industries, we continuously develop and improve materials and technologies, improve and expand more application projects to meet the increasing market demands and challenges.
PEVODYN®-Soft 78° Shore A is a kind of high performance polyurethane elastomer researched and developed by us, with long service life, effectively reducing starting friction and rolling friction. Outstanding mechanical properties include high cutting resistance, high tear resistance, high abrasion resistance and high energy efficiency.
VULKOLLAN ® 93 ° is a type based on Desmodur ® 15% high elasticity cross-linked polyurethane elastomer. Adopting VULKOLLAN ® Industrial wheels and casters made of materials have a long service life and can meet high load-bearing requirements during high-speed operation.
PEVOPUR® 93° It is a high-quality polyurethane elastomer with excellent mechanical and chemical properties, high dynamic load-bearing capacity, high elasticity, and good pressure deformation performance. At the same time, it has good resistance to many chemical media and has a load-bearing capacity several times higher than rubber.
VULKOLLAN ® 95 ° Shore A is based on Desmodur ® 15% high elasticity polyurethane elastomer to meet high requirements and high load-bearing applications. Its outstanding mechanical characteristics include long service life, extremely high dynamic load-bearing capacity, extremely high wear resistance and tear propagation resistance, extremely high mechanical wear resistance, and extremely low compression deformation.
VULKOLLAN ®- QUARTZ is a VULKOLLAN based technology ® The composite material is suitable for use in areas that are extremely slippery and dangerous due to icing. Due to the presence of quartz sand, it can significantly improve traction performance and maintain VULKOLLAN ® Other perfect performance inherent in itself.
VULKOLLAN ®- ELF is a Desmodur based technology ® 15% anti-static patented material. By releasing charges through the entire adhesive layer and covering the entire contact surface, continuous and effective charge discharge can be achieved while ignoring adhesive layer wear. VULKOLLAN ®- The conductivity of ELF is completely higher than the requirements set by the DIN EN 12527 ff standard.
VULKOSOFT ® It is based on Desmodur ® 15% high elasticity polyurethane elastomer. VULKOSOFT ® Having all VULKOLLAN ® All materials have excellent mechanical properties, including high dynamic load-bearing capacity, high wear resistance, and tear propagation resistance. They have the highest elastic modulus among all elastomers, good mechanical wear resistance, high impact elasticity, and low compression deformation.
VULKODYN ® It is a high elasticity polyurethane elastomer developed by R Ä DER-VOGEL for extreme dynamic applications. VULKODYN ® The material can reduce the rolling resistance coefficient by about 20%, meet higher load-bearing requirements at the same operating speed, have better shock absorption, and provide greater traction.
TRACTOTHAN ® It is a type based on VULKOLLAN ® The patented composite materials developed by the material. The production process of integrating special TPU particles in the adhesive layer improves the grip effect and reduces the risk of sliding.
TRACTOSOFT ® It is a type based on VULKOLLAN ® The patented composite materials developed by the material. The production process of integrating special TPU particles in the adhesive layer improves the grip effect and reduces the risk of sliding.
PEVOSOFT ® It is a high-quality polyurethane elastomer with excellent mechanical and chemical properties, high dynamic load-bearing capacity, high elasticity, and good pressure deformation performance. And compared to rubber, it has significantly better elasticity.
PEVODYN ® It is a new high-performance polyurethane elastomer developed by R Ä DERVOGEL, which can reduce the starting and running friction system and provide high dynamic load.
Different industries and application conditions have different requirements for polyurethane wheels. Our engineers will provide one-stop and comprehensive industrial solutions for customers’ situations.
The production line logistics system in the Industry 4.0 era is evolving from “functional satisfaction” to “performance optimization”. This case proves that the performance optimization of the walking wheel, as a basic component of logistics equipment, can generate systematic benefits far beyond expectations. Through scientific material selection and engineering design, polyurethane wheels can become the “invisible driving force” for improving the quality and efficiency of smart factories.
READ MORE >>
The shield tunneling method is developing towards longer distances, larger diameters, and more complex geological conditions, which puts higher demands on the reliability of the supporting systems. This case proves that under extreme heavy load and harsh environmental conditions, the deeply customized polyurethane wheel solution can fundamentally improve the performance of key moving parts and provide solid guarantees for the stable operation of large heavy-duty equipment.
READ MORE >>
In the pursuit of efficiency and reliability in automated logistics systems, deep exploration and customized innovation of basic component performance are key to unleashing the potential of the system. We are committed to becoming a strategic partner for high-end logistics equipment manufacturers and operators, providing solid guarantees for the “last millimeter” accuracy and “over 10000 hours” lifespan of automation systems with advanced material technology and profound scene understanding.
READ MORE >>
Yalide Technology focuses on providing customers with one-stop system solutions for roller/shaft/wheel products.
Address: No. 106, Shajingtou Lane 1, Matigang, Dalingshan Town, Dongguan City, Guangdong Province
Telephone: +86-13790238062
Email: yandex@cnyandex.cn
whatsApp: +86-13790238062
